First-Principles and Experimental Study on the Effect of Vanadium Content on the Structure and Properties of AlCrTiSiN Nanocomposite Coatings
编号:36 访问权限:仅限参会人 更新:2026-09-17 08:52:12 浏览:1次 口头报告

报告开始:暂无开始时间(Asia/Shanghai)

报告时间:暂无持续时间

所在会场:[暂无会议] [暂无会议段]

暂无文件

摘要
The AlCrTiSiVN coatings with different V contents were prepared by a combined method of arc ion plating and magnetron sputtering, and the effect of V on the microstructure and properties of the coatings was investigated. The results showed that all coatings were mainly composed of fcc-CrN, fcc-AlN, and Ti5Si4 phases. With increasing V content, the surface roughness first decreased and then increased. The coating containing 3.6% V exhibited the best surface quality and the densest structure. Both first-principles calculations and experimental results demonstrated that the coating with 3.6% V had the optimal mechanical properties. As the temperature increased, the average friction coefficient and wear rate first increased and then decreased. With increasing V content, the average friction coefficient and wear rate first decreased and then increased, and the S3 coating showed the lowest average friction coefficient and wear rate. At room temperature and 400 °C, the coatings mainly underwent abrasive wear and slight adhesive wear; at 400 and 600 °C, the wear mechanisms were mainly abrasive wear, oxidative wear, and adhesive wear. In cutting H13 steel and TC4 titanium alloy, the AlCrTiSiVN coating exhibited superior performance. By improving lubricity, the AlCrTiSiVN coating effectively reduced cutting temperature and cutting force, inhibited adhesion, enhanced machining stability, and improved machined surface quality.
 
关键词
AlCrTiSiN coating;,Vanadium,;Microstructure,Properties
报告人
其香 范
Associate Professor 天津职业技术师范大学

稿件作者
其香 范 天津职业技术师范大学
发表评论
验证码 看不清楚,更换一张
全部评论
重要日期
  • 会议日期

    10月16日

    2026

    10月18日

    2026

  • 10月15日 2026

    初稿截稿日期

主办单位
中国机械工程学会
承办单位
扬州大学
中国矿业大学
中国机械工程学会表面工程分会
联系方式
历届会议
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询