1 / 2026-11-10 17:39:43
Hydro-Mechanical Modeling of Concrete Dam Interfaces: From Seepage-Induced Joint Opening to Uplift Instability
Hydro-mechanical coupling; concrete dam joints; seepage-induced instability; fracture aperture; tensile strength; damage localization; seepage-velocity monitoring.
全文待审
Nazim Hussain / China Institute of Water Resources and Hydropower Research Department of Structures and Materials
Zhang Guoxin / China Institute of Water Resources and Hydropower Research
Songhui Li / China Institute of Water Resources and Hydropower Research
Construction joints and pre-existing fractures in concrete dams can become preferential seepage pathways under reservoir loading. Water pressure reduces effective normal stress, promotes joint separation and may accelerate uplift instability. However, the parameters controlling the onset of opening and the subsequent progression toward unstable response need to be distinguished. This presentation brings together findings from two published numerical investigations to examine the roles of initial aperture, interface strength, damage localization and seepage velocity evolution. The first investigation used a coupled seepage stress damage finite element framework to analyze pre-existing cemented joints with initial apertures of 1.0–3.0 mm. Parametric cases varied interface cohesion and tensile strength independently to examine crack-opening displacement and hydraulic instability. A complementary post-initiation analysis considered construction joints with initial openings of 1 mm, 2 mm and 3 mm under stepwise hydraulic-head loading. Hydraulic head redistribution, uplift displacement, mechanically evaluated aperture, interfacial damage and seepage velocity were monitored. A normalized velocity growth indicator was used to characterize changes in seepage response between loading steps.

The results show that wider initial openings favor earlier rapid separation. In the first investigation, changing cohesion had little influence on the pressure opening response once tensile separation dominated whereas interface tensile strength strongly affected damage initiation and the pressure associated with instability. A dimensionless ratio of seepage pressure to interface tensile strength helped interpret the transition from gradual opening to damage-dominated response, although its critical value depends on geometry and boundary conditions. In the post-initiation investigation, hydraulic head accumulated near the restricted drainage joint and uplift localized along the interface. The 3 mm case lost stable response before the 2 mm and 1 mm cases. Increased seepage velocity growth accompanied accelerated opening, suggesting a potential supplementary monitoring indicator. Damage localization was assessed, but its additional contribution to hydraulic aperture was not quantified because the damage aperture coefficient was not independently calibrated. Together, these findings suggest that assessment of jointed hydraulic structures should consider tensile resistance and initial aperture alongside uplift displacement, localized damage and seepage response. This may support more targeted monitoring and maintenance of dams and hydropower infrastructure, contributing to long-term structural resilience. The analyses address monotonic hydraulic loading rather than dynamic disturbance; extending and validating these mechanisms under transient or cyclic loading remains an important next step for rock engineering applications.

 
重要日期
  • 会议日期

    05月14日

    2027

    至

    05月16日

    2027

主办单位
中国科学院武汉岩土力学研究所
承办单位
中国科学院武汉岩土力学研究所
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询