Study on grain deformation in bending zone of SUS304 stainless steel foil
The 19th International Conference on Metal Forming 2022
Yongsheng Xu SHANGHAI JaoTong University
S3
私有 口头报告
Rheological parameters influence on deformation heterogeneities in uniaxial compression tests
The 19th International Conference on Metal Forming 2022
Villié Loïc Ecole de Technologie Supérieure
S3 /S3-1
2022年09月13日 15:00~15:15
私有 口头报告
New developments of formability evaluation methods for hot stamping
The 19th International Conference on Metal Forming 2022
Li Jiaqi Imperial College London
S3 /S3-2
2022年09月13日 20:45~21:00
私有 口头报告
High strain rate compressive behaviour of 6000-series aluminium alloy sheet under SHPB impact loading
The 19th International Conference on Metal Forming 2022
Zhang Feifei Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences
S3 /S3-3
2022年09月14日 17:00~17:15
仅限参会人 口头报告
High performance springback-free forming of Al alloy component by dislocation-enhanced strengthening and creep
The 19th International Conference on Metal Forming 2022
Liu Chunhui Central South University
S3 /S3-3
2022年09月14日 16:30~16:45
私有 口头报告
The influence of material model on the prediction of neck development for aluminium alloy sheet
The 19th International Conference on Metal Forming 2022
Hong Lu Yanshan University
S3 /S3-2
2022年09月13日 19:30~19:45
私有 口头报告
Model for Characterizing static softening behaviour of GH4500 superalloy during two-pass thermal compression
The 19th International Conference on Metal Forming 2022
zhou ziyu Northwestern Polytechnical University
S3 /S3-3
2022年09月14日 17:45~18:00
私有 口头报告
Wall thickness variation in the conventional spinning of metal sheets
The 19th International Conference on Metal Forming 2022
Gao Pengfei Northwestern Polytechnical University
S3 /S3-1
2022年09月13日 17:00~17:15
私有 口头报告
Circumferential pure shear test of thin-walled aluminum alloy tubes
The 19th International Conference on Metal Forming 2022
Zhang Shuning Harbin Institute of Technology
S3 /S3-3
2022年09月14日 17:15~17:30
私有 口头报告
